st,lis2ds12 (on spi bus) |
您所在的位置:网站首页 › frame format motoroal › st,lis2ds12 (on spi bus) |
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “st,lis2ds12” compatible. Name Type Details reg array register spaceThis property is required. See Important properties for more information. label string Human readable string describing the device (used as device_get_binding() argument)This property is required. See Important properties for more information. status string indicates the operational status of a deviceLegal values: 'ok', 'okay', 'disabled', 'reserved', 'fail', 'fail-sss' See Important properties for more information. compatible string-array compatible stringsThis property is required. See Important properties for more information. reg-names string-array name of each register spaceinterrupts array interrupts for deviceSee Important properties for more information. interrupts-extended compound extended interrupt specifier for deviceinterrupt-names string-array name of each interruptinterrupt-parent phandle phandle to interrupt controller nodeclocks phandle-array Clock gate informationclock-names string-array name of each clock#address-cells int number of address cells in reg property#size-cells int number of size cells in reg propertydmas phandle-array DMA channels specifiersdma-names string-array Provided names of DMA channel specifiersio-channels phandle-array IO channels specifiersio-channel-names string-array Provided names of IO channel specifiersmboxes phandle-array mailbox / IPM channels specifiersmbox-names string-array Provided names of mailbox / IPM channel specifierswakeup-source boolean Property to identify that a device can be used as wake up source. When this property is provided a specific flag is set into the device that tells the system that the device is capable of wake up the system. Wake up capable devices are disabled (interruptions will not wake up the system) by default but they can be enabled at runtime if necessary.power-domain phandle Power domain the device belongs to. The device will be notified when the power domain it belongs to is either suspended or resumed. |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |